System Test
Testing conducted on a complete, integrated system to evaluate the system's compliance with its specified requirements .
See Also: Systems, Equipment, Test Systems, System Integrators
-
product
RF Test Enclosure Ideal For High-volume Repeatable Testing, ≥90 DB Isolation, 300 MHz - 18 GHz
dbGUARD
The dbGUARD provides up to 90 dB isolation from 300 MHz to 18 GHz. The IASG (Inverted Asymmetric Squarewave Gasket) design eliminates any leakage along the perimeter of the RF enclosure. This makes the dbGUARD conducive to testing all wireless technologies including 5G/LTE, Wi-Fi, Bluetooth, ZigBee, WiMAX, etc. The interior cavity is finished with a next-generation RF absorptive coating similar to what is found in stealth technology. This allows for positioning the DUT in the shielded box without affecting attenuation caused by reflections.
-
product
Machine Vibration Monitoring Devices & Systems
Spider-80x
*Route Based Vibration Data Collection*Remote Condition Monitoring Software*Vibration Diagnostics System
-
product
Parallel Electrode SMD Test Fixture
16192A
The 16192A test fixture is designed for impedance evaluations of side electrode SMD components. The minimum SMD size that this fixture is adapted to evaluate is 1(L)[mm].
-
product
Test RTM with Ethernet SFP
VR300
Sundance Multiprocessor Technology Ltd.
The VR300 is a Test RTM, typically used during firmware and software development and debugging cycles on the VF360. The rear panel contains two mini-USB connectors, a Dual mini-SAS (SFF-8088) connector and a SFP case.
-
product
Tan Delta Test Set
TD 5000
The high-voltage generator TD 5000 is a complementary module of STS serie. TD 5000 designed to perform Tan Delta measurements, dissipation factor and capacitance of transformer and bushing at the frequency of the mains or in a wide frequency range.
-
product
Radio System
FASST
Futaba is the first of the traditional radio manufacturers to bring the advantages of 2.4GHz spread spectrum technology to modelers – and the first to introduce that technology in a full-range aircraft system. For getting the full benefits of 2.4GHz technology, you'll find that Futaba's experience makes all the difference.
-
product
Rugged IP67-rated Fanless Embedded System With Intel® Core™ I5-7300U & Celeron® 3965U, VGA, GbE LAN, 2 USB, 2 COM And 9 To 36 VDC
eBOX800-511-FL
The eBOX800-511-FL is a fanless embedded system with IP67-rated housing and M12 connectors for mission-critical environments. This rugged embedded system is powered by the onboard 7th generation Intel® CoreTM i5-7300U and Celeron® 3965U (formally codename: Kaby Lake) and comes with one 204-pin DDR4-2133 SO-DIMM slot with system memory up to 16GB. The eBOX800-511-FL is designed for enabling to function in harsh environments with power protection, a wide range operating temperature from -30°C to 6...show more -
product
Automated Compliance and Device Characterization Tests
N5990A
The Keysight N5990A test automation software platform is the most powerful tool for serial and multi-lane gigabit testing. It is the unique universal platform for testing a wide range of digital buses such as PCI Express, USB, HDMI or MIPI. The same graphical user interface and operating principles are used for all applications. This boosts productivity, especially when testing devices which support multiple digital buses. The N5990A can be tailored to your individual test needs with the flexibl...show more -
product
System Module AXIe-0
SMGS AXIe-0
The SMGS AXIe-0 module is a 14-port unmanaged Ethernet switch. One of the ports of this switch is brought out to the front panel of the module and is used for interaction via the Ethernet interface with external equipment (PC, Ethernet local network), the remaining 13 ports of the switch are used for interaction with the instrument modules of the AXIe-0 standard crate. This architecture of the module allows for the interaction of an external PC with any instrumental module of the AXIe-0 standard crate.
-
product
Ozone Test Chamber
EKT-2001OZ-HCSTX
Designed and manufactured in accordance with ASTM D1149, ISO1431 & JIS K6259 standards. Providing precise and accurate ozone (OZ) concentration environment for rubber and polymer test. Widely applied to (1) Accelerated ageing research (2) Quality control and assurance tests and (3) R&D laboratory formula experiments for cracking resistance.
-
product
Windows Managed Client/Server Software For BACnet Systems
CBQ
CBQ is implemented as a managed .NET 64 bit DLL. The DLL works with BACnet/IPv4 and BACnet/IPv6 over Ethernet, and you can even use MS/TP through USB or any standard serial COM port, with an external EIA-485 converter. Our famous MS/TP for Windows technology is unequalled and provides fast, reliable operation with direct connection to EIA-485 networks.
-
product
Dimensional Gauging Systems
Marposs provides a complete line of solutions for dimensional gauging, both manual and automatic. We work closely together with our customers to design tailor-made applications according to their needs and requirements, whether the quality control is performed for off-line sample-based or integrated automatic production lines. We complement these solutions with made-to-order Calibration Masters (rings, plugs, part-like masters and master gears).
-
product
USB-C® – USB 2.0 Plug HS SQ Test Fixture
AUT17094
This product is designed for USB-C USB2.0 Receptacle Host Electrical Test.
-
product
Systems For Monitoring And Managing Multiservice Networks
Designed to obtain information about the state of the network in operation. The system allows you to organize the protection of operated equipment or other important facilities. The system is open and allows you to increase the necessary functionality as the operator's business develops. Used in optical and coaxial networks.
-
product
Ambient Air Quality Monitoring System
AQMS
AQMS, the doctor for "Human Health"An Air Quality Monitoring Station (AQMS) is a system that measures metrological parameters such as wind speed, wind direction, rainfall, radiation, temperature, barometric pressure and ambient parameters. The AQMS also integrates a series of ambient analyzers to monitor the concentration of air pollutants (such as SO2, NOx, CO, O3, THC, PM, etc.), continuously. HORIBA also provides mobile monitoring stations that can be used to monitor ambient conditions at multiple sites.
-
product
Standard & Custom Test Fixtures
Both standard and custom Test Fixtures from OAI enable the user to integrate the solar cell with the I -V tester. Fixture configurations range from from simple hold down devices to temperature-controlled fixtures with front and back side contact. We invite you to contact an OAI Application Engineer for help with your fixture design. With our expert guidance, you can expect maximum performance from your I -V Tester and Solar Simulator.
-
product
Bench-top Test Jigs
Robust, easily customised, standalone kits for testing a variety of PCB's. Basic hinged-top or cam operated pusher plate, advanced cam-operated gate with fully adjustable pusher-fingers.
-
product
PC-based DSP Systems
PCI / cPCI : 32bit, 33MHz6201 or 6701 DSP16MB SDRAM1MB SBSRAM15+ Mezzanine I/O Cards (see OMNIBUS)Open bus for custom I/OFIFOPort external data port
-
product
Test Automation Framework
Gauge
Gauge is an open source test automation tool that is completely hackable. Written in golang, Gauge lets you write tests in plain-speak and refactor fearlessly. Its pluggable architecture allows you to customize your environment so you can write tests in the language and IDE of your choice.
-
product
DC Coupled Differential Switching System
BS1553F(X)
Universal Switching Corporation
The BS1553F(X) is a modular passive DC coupled differential switching system. It is designed as an automated "patch panel" for interconnecting numerous MIL-STD-1553 devices, cables and hardware, or for routing other differential signals such as '422 clock/data or kelvin ATE measurements. The I/O capacity is scalable from a small 8x8, up to 64x64 in one 5RU unit.
-
product
ARINC 429 Test And Simulation PMC Module
PMC-429
*4, 8, 16 or 32 software programmable TX / RX channels*Programmable high / low speed operation*Simultaneous operation of all TX / RX channels*PXI interrupts, star trigger, and PXI clock*Error entry and detection*128 MB RAM*Label selective triggering for recording / filtering*IRIG-B timecode encoder / decoder for data correlation*Real-time recording and later analysis of multiple channels*Sorting according to SDI field*VXI Plug & Play driver including soft front panel*Supports: C, C ++, C # and .net*Driver support: Windows, Linux, VxWorks and other systems
-
product
Cable Test Van
Techno Instrumentation (India) Private Limited
Cable fault locating van with installation according to users specifications and requirement.
-
product
Plasma CVD & Reactive Ion Etching System
MODEL DRIE-1100-LL-ECR
The Tek-Vac DRIE-1100-LL-ECR series systems are designed for both high-density plasma chemical vapor deposition and reactive ion etching of sub-micron integrated circuits, optical devices and RF microwave electron devices.
-
product
Uninterruptible Power Systems
SP Series
Clary's SP Series are the world's most advanced Uninterruptible Power Systems (UPS), designed specifically for electronics equipment in IT, Traffic and Security applications. Industry proven, each product in the SP Series delivers on-line double-conversion protection 100% of the time for reliable, continuous, and error-free operation regardless of utility power quality.
-
product
Test Leads
AL-34WB
Standard Electric Works Co., Ltd
● Wire length: 1.2m approx. Silicone insulated wire (1000mm) with wire connected to straight input plugs (130mm PVC wire), and wire for clamp (100mm PVC wire). ● Outside diameter of silicone insulated wire: 5mm Outside diameter of PVC wire: 3.5mm● Input plug color: Red•Green•Black•Blue ● Current rating: 5A● Voltage rating: 300V● Designed for Milliohm meter, Micro-ohm meter, Low resistance measurement with high current injection. ● Conductor size: 40mm maximum● Safety standard: IEC/EN 61010-031 CAT IV 300V
-
product
Three Stage Matrix Switching System
TX Series
CYTEC's TX Series Three Stage Matrix Switching System is completely nonblocking, full fan-out configurations from 16x16 to 128x128, with a bandpass to 140 MHz.
-
product
Wafer Flatness Measurement System
FLA-200
*Measures Thickness, TTV, Bow, Warp and site and global Flatness (ASTM compliance)*Measures all materials including Si, GaAs, Ge, InP, SiC*Full 500 micron thickness measurement range without re-*calibration2-D /3-D Mapping software
-
product
Satellite Phone Interception Systems
Global Mobile Personal Communication (GMPCS) or simply Satellite Phone Communication Interception solutions assist LEAs with real-time interception and analysis of voice, short message and data communication over Thuraya, Inmarsat and Iridium satellite phones and BeiDou terminals. The solutions are scalable and customizable based on the end customer’s requirements.
-
product
Next Generation Subsea Attitude and Heading Reference Systems
TOGS
The new TOGS subsea navigation system is built on core TSS fibre optic gyro (FOG) navigation technology with significant improvements in efficiency and functionality. It is available in three standard heading accuracy variants: 0.1° (TOGS1), 0.3° (TOGS3) and 0.5° (TOGS5), all rated for operational depths to 4,000m or 6,000m. Attitude data is delivered via accurate roll/pitch measurement capabilities of 0.01° (TOGS1) and 0.05° (TOGS3 and TOGS5), and a heave performance of 5cm or 5%.
-
product
GPC/SEC Data Systems for Enhanced Control and Performance
Agilent GPC/SEC data systems enable powerful control, data acquisition, calculations, and result reporting. For accurate molecular weight analysis and complete polymer and protein characterization, GPC/SEC software provides the functionality required for conventional and advanced GPC/SEC in a simple, powerful, fully integrated package.GPC/SEC software for OpenLAB CDS adds application-specific calibration, data processing, and reporting to your OpenLAB CDS. Cirrus GPC Multi Detector software, an ...show more
